- Home
- ยป
- Our Products
- »
- Industrial Valves and Controllers
Industrial Valves and Controllers
A valve is a device that regulates, directs or controls the flow of a fluid (gases, liquids, fluidized solids, orslurries) by opening, closing, or partially obstructing various passageways. Valves are technicallyfittings, but are usually discussed as a separate category. In an open valve, fluid flows in a direction from higher pressure to lower pressure. The word is derived from the Latinvalva, the moving part of a door, in turn fromvolvere, to turn, roll.
The simplest, and very ancient, valve is simply a freely hinged flap which drops to obstruct fluid (gas or liquid) flow in one direction, but is pushed open by flow in the opposite direction. This is called acheck valve, as it prevents or "checks" the flow in one direction. Moderncontrol valvesmay regulatepressureorflowdownstream and operate on sophisticatedautomationsystems.
Valves have many uses, including controlling water forirrigation, industrial uses for controlling processes, residential uses such as on/off and pressure control to dish and clothes washers and taps in the home. Even aerosols have a tiny valve built in. Valves are also used in the military and transport sectors.
Cast Iron Sluice Gate Valve
Minimum Order Quantity: 10 Piece
Material | Cast Iron |
End Connection | Flanged |
Usage/Application | Industrial |
Media | Water |
Packaging Type | Box |
Size/Dimension | 15mm |
Country of Origin | Made in India |
Specifications:
- Range: as per IS 14846 Size 32 to 1500mm (Non Rising & Rising) as per BS 5163
- Size: 50mm to 600mm (Non Rising)
- Pressure Rating up to PN 1.6Spindle: Bronze / SS
Features:
- Rigid and sturdy design
- Low pressure loss across the valve
- Available in Non Rising as well as in Rising Spindle
Type:
- Suitable for clear water up to 45 C and 5000 ppm
- Turbidity, other fluids with maximum pressure /
- Temperature conditions within the scope of IS:14846
- Long service life and leak-tightness even after
- thousands of open / close cycles
Kirloskar CI Non Return Valve
Minimum Order Quantity: 10 Piece
Model Name/Number | 1111 |
Brand | Kirloskar |
Media | Water |
Pressure | PN1.0 |
End Connection | Flanged |
Valve Size | up to 0.25 inch |
Material | Cast Iron |
Features:
- Best raw material used for durability
- Long Life
- High Performance
- Our valves are appreciated for dimensional accuracy, precision performance and corrosion resistant finish.
Cast Iron Globe Valve
Size | 1000mm |
Usage/Application | Industrial |
Material | Cast Iron |
Body Material | Stainless Steel |
Brand | PEC |
Media | Water |
Automation Grade | Manual |
Pressure | High Pressure |
With prosperous industry practice, our entity has gained huge appreciation in the market by presenting Cast Iron Globe Valves to our respected patrons.
Salient Features:
- Body and bonnet - Cast with uniform sections, precision machined.
- Body : Straight through port without recesses except in the seat area - Minimum resistance to flow, turbulence and erosion.
- Flex wedge: Guide slots in the wedge engage with integral guide ribs in the body, Stem-to-wedge contact close to wedge centre - Better sealing, smoother operation.
- Seal-welded seat ring - Eliminates leakage path between seat ring and body, does not loosen up due to temperature fluctuations or vibration.
- Stem - One-piece construction with forged T-head - Long service life, smoother operation.
Gun Metal Valve
Minimum Order Quantity: 10 Piece
Brand | Sant |
Media | Gas |
Pressure | High Pressure |
Color | Golden |
Size | 200mm |
Material | Gun Metal |
End Connection Type | Screwed |
Usage/Application | Industrial |
Features:
- High Ductility
- Resistance to Corrosion
- Good Flexibility
- Heat Resistance
- Outstanding Material Strength
- Efficient performance
- Shock Resistance
Cast Iron Y Type Strainer
Minimum Order Quantity: 10 Piece
Valve Type | Y Type |
End Connection | Flange End |
Pressure | PN1.6 |
Brand | Sant |
Country of Origin | Made in India |
Material | Cast Iron |
Media | Water |
Forbes Marshall Spirax Disc Check Valves
End Connection | Flanged |
Size | 1000mm |
Usage/Application | Industrial |
Material | WCB |
Media | Gas |
Brand | Forbes Marshall Spirax |
Pressure | PN1.6 |
Sizes and pipe connections DN15, 20, 25, 32, 40, 50, 65, 80, 100 Suitable for installation between BS 10 Tables 'E and ‘H', BS 4504/(DIN) PN6, 10, 16. 25, 40; JIS 5, 10. 16, 20 flanges with the following exceptions: DN40, 50. 80 and 100 - will not fit between JIS 5 flanges DN65 and 80 - will not fit between BS 10 'E' flanges.
Optional extras Heavy duty springs (700 mbar opening pressure, up to DN65) far boiler teed applications. Viton soft seats for oil, gas and steam applications. EPDM soft seats for water applications.
Limiting conditions Note:
- Special testing to allow lower temperature operation can be provided at extra cost. Consult Spirax Sarco
Cast Iron Butterfly Valves
Minimum Order Quantity: 10 Piece
Disc | CI |
Brand | Titan |
Usage/Application | Industrial |
Pressure | High Pressure |
Country of Origin | Made in India |
Valve Size | 20" |
Material | Cast Iron |
- Available in Centric Wafer / Lugged design
- Single, double eccentric design
- Bubble tight shut off
- Less wear and tear of seal and longer life
- Self-cleaning and non-jamming seat design
- Low operating torque
- Rigid and sturdy design
- Ideal for throtting as well as isoltaion Power plants
- Water supply and sewage
- Chemical and petrochemical plants
- Water works
- Water / Effluent / Sewage treatment plants
Cast Iron Industrial Valves
Minimum Order Quantity: 10 Piece
Model Name/Number | 1111 |
Valve Size | 1/2" |
Media | Gas |
Usage/Application | Industrial |
Pressure | PN25 |
Automation Grade | Manual |
Cast Iron Reflux Valves
Pressure | High Pressure |
Media | Water |
Surface Treatment | Paint Coated |
Color | Blue |
Country of Origin | Made in India |
Valve Size | 300mm |
Material | Cast Iron |
Usage/Application | Industrial |
- Available in Centric Wafer / Lugged design
- Single, double eccentric design
- Bubble tight shut off
- Less wear and tear of seal and longer life
- Self-cleaning and non-jamming seat design
- Low operating torque
- Rigid and sturdy design
- Ideal for throtting as well as isoltaion Power plants
- Water supply and sewage
- Chemical and petrochemical plants
- Water works
- Water / Effluent / Sewage treatment plants
Cast Iron Gate Valve
End Connection Type | Flanged |
Brand | Neta |
Usage/Application | Industrial |
Media | Water |
Country of Origin | Made in India |
Material | Cast Iron |
Size | 15mm |
Specifications:
- Product Standard: IS:14846
- Body Material cum Standard: Cast Iron IS:210 Gr.FG200
- Description: Bolted Bonnet, Inside Screw & Non-Rising Stem
- Type of Seat: Renewable seat
- Type of Disc: Solid wedge
- Trim: Cu-Alloy Rings, stem SS (12 Cr.12)
- Gland Packing: Jute & Hemp / Rubber
- End Details: Flanges as per IS:1538 FF drilled
Other Details:
Nominal Size | Nominal Size (Inches) | F | H | W | D | T | N x d | K |
50 | 2 | 178±2 | 325 | 225 | 165 | 16 | 4 x 19 | 125 |
65 | 2.1/2 | 190±2 | 360 | 225 | 185 | 16 | 4 x 19 | 145 |
80 | 3 | 203±2 | 400 | 225 | 200 | 21 | 4 x 19 | 160 |
100 | 4 | 229±2 | 450 | 320 | 220 | 22 | 8 x 19 | 180 |
125 | 5 | 254±2 | 485 |
Kirloskar Foot Valves
Nominal Pressure | PN16 |
Material | Cast Iron |
Connection Type | Thread |
Operating Temperature | 70 Degree C |
Brand | Kirloskar |
Country of Origin | Made in India |
Color | Blue |
Installation Type | Horizontal |
Size | DN100 |
Features:
- Rigid and sturdy design with minimum loss of head across the valve perfectly flat seating surface for good sealing preventing entry of foreign body to pump through suction pipe long service life
Range:
- Conforming to IS:4038
- Size 50mm to 450mm
Kirloskar Foot Valve 10"
Operating Temperature | 500 deg c |
Design Structure | As per IS |
Installation Type | Horizontal |
Country of Origin | Made in India |
Size | 10" |
Material | Cast Iron |
Color | Blue |
Thermostatic Steam Traps
Model Name/Number | 11111 |
Brand | UKL |
Color | Black |
Usage/Application | Industrial |
Material | Forged Steel |
Pressure | PN1.0 |
Size | 25mm |
With the support of our professionals, we have achieved a reliable name as a leading manufacturer and supplier of Thermostatic Steam Traps. These traps are used to discharge condensate and non-condensable gases. The traps open, close or modulate automatically. We manufacture these traps under the firm guidance of expert supervisors using high quality metal, sourced from trusted vendors. Thermostatic Steam Traps come in different sizes and specifications as per client's requirements. We offer these traps at reasonable prices to clients.
Features:
- Sturdy and durable
- Light in weight
- Corrosion resistant
Sant Moisture Separator
Minimum Order Quantity: 10 Piece
Pressure | PN1.6 |
Temperature | 890 Degree C |
Warranty | 1 Year |
Technique | Hot Rolled |
Brand | Sant |
Model Name/Number | 1891 |
Material | WCB |
In this field we are recognized amongst trusted distributor and suppliers of Sant Moisture Separator. These separators are used in industrial valves for separation of moisture. We manufacture these separators under the firm guidance of expert supervisors using best quality mild steel and cast iron. Highly demanded in the market, these separators come in different sizes and specifications for clients. We offer these Moisture Separators at affordable prices to clients.
Features:
- Rust proof
- Sturdy and durable
- Easy to mount
Bronze Pressure Reducing Valve
Minimum Order Quantity: 10 Piece
Color | Golden |
Temperature | 437 Degree F (225 Degree C) |
Valve Size | up to 0.25 inch |
Model Name/Number | PRV-20 |
Brand | Sant |
Media | Gas |
Automation Grade | Manual |
Testing | 500 Psig |
Ball Float Traps
Minimum Order Quantity: 10 Piece
Model Name/Number | 15676 |
Country of Origin | Made in India |
Connector Type | Screwed |
Material | WCB |
Pressure | PN1.6 |
Size | 250mm |
Brand | UKL |
Steam used for secondary heating like Coils, vessels, heat exchangers etc, generate a lot of condensate post heat transfer. This large quantity of condensate can handle by Ball Float Trap. This condensate has a substantial heat component with cost tagged to it. Also this is treated and pure water and can be used as Feed water for the Boiler, saving the cost of heating, Water Bill and Treatment chemicals. Therefore it makes sense to recycle / reuse this condensate. This function is also done by the Ball Float Trap.
Operating Animation:
- UKL Ball Float Trap discharge condensate near to steam saturation temperature, which works on the principle of Buoyancy, [densities difference of Water and Steam].The rising condensate level elevates the Float open the valve and discharges the condensate, and reverse, when the level of condensate drops, valve close the trap.
- The working principle of this trap can also be used as Auto Air Moisture Drain, as Air Eliminator in liquid line, as well as for lifting condensate, as a pump.
Thermodynamic Steam Trap
Minimum Order Quantity: 10 Piece
Usage/Application | Industrial |
Class Rating | 800 |
Media | Gas |
Packaging Type | Box |
Size | 1/2" |
Material | Forged Steel |
We are offering Thermodynamic Steam Trap to our valuable customers.
Steam has two components:
- The latent heat useful in process for Heat transfer, and the Sensible heat in the form of condensate having only the heat content not useful in process, rather hindering Heat transfer and causing damage to piping equipment due to its presence. Hence, there is need to remove condensate and trapped steam. This is done by Steam trap.
- The Thermodynamic Trap works on the principle of difference in the velocities of Steam and Condensate. Used Mainly on Drip lines of the main steam distribution line, uses condensate pressure to open the trap and discharge the condensate and then the Flash steam formed due to the high flash steam velocity & accumulation of flash steam over disc, Device close and trap the live steam when it appears.
- Thermodynamic Steam Trap are compact and lightweight and discharge condensate as and when it is formed.
Operating Animation:
- Available in Sizes: 15, 20 and 25mm
- End connections: Threaded to BSP/BSPT/NPT, SW and BW, as well as Flanged to #150/300/600/900/1500. e
- Pressure Ranges of 30 bar [UTD21], 55 bar TD55 [Single and Three orifices], 100Bar [UTD 62] AND 250 Bar [UTD120]
- MOC: AISI 420./ 743 Gr. CA40[UTD21/55] / ASTM A217 Gr. WC6[UTD62] / ASTMA 182 Gr. F22 cl3. [UTD120]
- Max. Operating temperature: 425 Deg. C[UTD55] 550 Deg. C. [UTD62/120]
Sant Piston Valve
Minimum Order Quantity: 10 Piece
Material | WCB |
Usage/Application | Water |
Brand | Sant |
Size | 1/2" |
End Connection | Flanged |
Temperature | 890 Degree F |
Country of Origin | Made in India |
Uni Klinger Piston valves, Steam used for secondary heating like Coils, vessels, heat exchangers etc, generate a lot of condensate post heat transfer. This large quantity of condensate can handle by Ball Float Trap. This condensate has a substantial heat component with cost tagged to it. Also this is treated and pure water and can be used as Feed water for the Boiler, saving the cost of heating, Water Bill and Treatment chemicals. Therefore it makes sense to recycle / reuse this condensate. This function is also done by the Ball Float Trap.
Operating Animation:
- UKL Ball Float Trap discharge condensate near to steam saturation temperature, which works on the principle of Buoyancy, [densities difference of Water and Steam].The rising condensate level elevates the Float open the valve and discharges the condensate, and reverse, when the level of condensate drops, valve close the trap.
- The working principle of this trap can also be used as Auto Air Moisture Drain, as Air Eliminator in liquid line, as well as for lifting condensate, as a pump.
Float Steam Traps
Pressure | 427 Degree C |
Brand | Forbes Marshall |
Color | Blue |
Country of Origin | Made in India |
Size | 15mm |
Material | Forged Steel |
Usage/Application | Industrial |
Forged Steel Valve
Minimum Order Quantity: 10 Piece
Size | 1000mm |
Brand | PEC |
Connector Type | Socket |
Body Material | Forged Steel |
Pressure | High Pressure |
Usage/Application | Industrial |
Automation Grade | Manual |
- Bolted body-bonnet design for valves up to Class 800. Valves with welded bonnet also available on request
- Screwed with seal-welded body-bonnet design for valves of Class 1500
- Bellows-sealed Gate and Globe valves available in Class
- 800
- Bolted body-bonnet joints provided with spiral-wound
- stainless steel gasket and graphite filler for ma ximum
- protection against leaks
- Die-formed graphite inner packing rings and braided
- graphite end rings with Inconel wire reinforcement and
- corrosion inhibitor
- T-head stem-disc connection of gate valve fully meets
- strength requirements of API 602 and API 598
- Rolled ACME thread on stem for smooth operation
- Tapered shoulder on the stem for back seating
- Self-aligning type gland assembly with stud-and-nut
- tightening
- Integral hard-faced body seat for globe and check valves
- Spring-loaded disc on check valves suitable for non-
- horizontal applications too
- Gate and globe valves can be offered with electrical
- actuators
- Austenitic SS forging for body and bonnet of Cryogenic
- valves, resulting in excellent impact strength, minimal heat
- loss and resistance to corrosion
- Valves can be offered to NACE MR-0175 and other special
- NACE requirements
- Valves can be supplied with IBR certification
Industrial Piston Valves
Minimum Order Quantity: 10 Piece
End Connection | Flanged |
Temperature | High |
Model Name/Number | Piston Valve |
Material | WCB |
Usage/Application | Water |
Brand | PEC |
Size | 250mm |
Our company has sculpted a remarkable place in the market as a reputed manufacturer and exporter of Industrial Piston Valve. Our diligent manpower uses quality grade mild steel to manufacture this valve. This valve is used in chemical, water treatment, pharmaceutical and oil refineries. To provide the flawless range to clients, we check this valve on defined quality parameters. We offer Industrial Piston Valve at reasonable prices.
Features:
- Robust construction
- Can withstand high pressure
- Corrosion proof
Stainless Steel Gate Valve
Minimum Order Quantity: 10 Piece
Technique | Hot Rolled |
Valve Type | Manual |
Inner Diameter | 20 mm |
Country of Origin | Made in India |
Size | 1000mm |
Material | Stainless Steel |
End Connection Type | Flanged |
Number Of Ways | 2 Ways |
Media | Water |
Packaging Type | Box |
We are offering Stainless Steel Gate Valve to our valuable customers.
The valves are approved by the global majors in oil & gas and power and have a reputation for reliable performance in critical services, across the globe.
Valves in bolted bonnet construction are available in pressure classes from 150 to 2500, in a variety of materials and end-connections.
Gate Valves:
- API 600/ISO 10434
- 2" to 72"
- ASME class 150 to 2500
Salient Features:
- Body and bonnet - Cast with uniform sections, precision machined.
- Body: Straight through port without recesses except in the seat area - Minimum resistance to flow, turbulence and erosion.
- Flex wedge: Guide slots in the wedge engage with integral guide ribs in the body, Stem-to-wedge contact close to wedge centre - Better sealing, smoother operation.
- Seal-welded seat ring - Eliminates leakage path between seat ring and body, does not loosen up due to temperature fluctuations or vibration.
- Stem - One-piece construction with forged T-head - Long service life, smoother operation.
Globe Valves:
- BS 1873
- 2" to 24"
- ASME 150 to 2500
Salient Features:
- Body and Bonnet - Cast with uniform sections, precision machined.
- In-situ hard-faced body seat - Eliminates leakage path between seat ring and body.
- Guided plug-type disc, Free-floating stem-disc connection - Uniform seating.
Check Valves:
- BS 1868
- 2" to 36"
- ASME 150 to 2500
Salient Features:
- Body and Bonnet - Cast with uniform sections, precision machined.
- Body: Permits full swing of disc on downstream side - Lower flow resistance and disc erosion.
- Disc: Internally-hinged - No opening on the body, higher integrity.
- Disc secured to hinge using lock nut and pin.
- Disc free to rotate to avoid localized wear
Sight Glass Valve
Minimum Order Quantity: 10 Piece
Connection | Flanged |
Pressure | PN1.6 |
Size | 1/2" |
Automation Grade | Manual |
Temperature | Max. 250 Degree C |
Material | Carbon Steel |
Glasses | Toughened Borosilicate |
Pressure Classes | 20 Bar |
The most common application is flow indication. The Sight Glass is fitted in the pipeline to indicate if the fluid is flowing correctly in the line. These can therefore be used to indicate blocked or choked valves or Traps, strainers, pipelines or piping components which otherwise would lead to a decreased level of performance, plant efficiency and safety.
The sight glasses would indicate if the traps are leaking or passing live steam/vapors.A sight Flow Indicator is a device which is inserted in a run of pipe to observe the flow of fluid in the pipe. To enhance the visibility of the flow, protrusion is often incorporated body of its indicator, in the flow stream, so that fluid impinging on the same, cause turbulence, which indicates flow.
This enables one to on observing the working of traps and other equipments by giving a clear view of the inside using toughened Borosilicate original Klinger sight glasses.
Specifications:
- Sizes: 15mm to 50mm
Features:
- No rotating parts-No maintenance
- Double window-High visibility
- Easy and quick inspection
- Used on condensate lines, Oil lines and heat exchangers, in condensers etc.
SS Disc Check Valves
Minimum Order Quantity: 10 Piece
Media | Gas |
Model Name/Number | 7890 |
Shape | Round |
Pressure | 1.5Mpa |
End Connection | Butt Weld |
Valve Size | up to 0.25 inch |
Material | Stainless Steel |
UKL Thermodynamic Steam Trap
Brand | UKL |
Usage/Application | Industrial/Steam |
Class Rating | PN1.6 |
Size | 1" |
Material | Forged Steel |
Sizes and Pipe Connections:
- 15NB and 20NB Screwed BSPT/NPT & Socket Wieldable ends
Limiting Conditions:
- Maximum operating conditions PMO - Max. operating pressure for screwed end 31.64 kg/cm' TMO - Max. operating temperature 427°C. Hydraulic test pressure for screwed ends 63.0 kg/cm2 PMO - Max. operating pressure for socket-weld ends 44.0 kg/cm1 Hydraulic test pressure for socket weld ends 88.0 kg/cm' PMOB-Max. operating back pressure on outlet should not exceed 80% of inlet pressure. Minimum inlet pressure for satisfactory operation 0.25 kg/cm2 On special request TD-3 can be supplied for PMO - Max operating pressure for socket-weld ends 55.0 kg/cm2 TMO - Max. Operating temperature 450°C.
Size Range:
- 1/2" to 1"
Note:
- Price mentioned is for general idea and it may fluctuate as per requirement
- Available with ASA - 150, 300 & 600 weld on flanges on request. 2. Available with IBR certificate
Additional Information:
- Delivery Time: Ready Stock
- Packaging Details: Jute Bag
Uniklinger Thermodynamic Steam Trap
Color | Grey |
Usage/Application | Industrial/Steam |
Class Rating | 800 |
Media | Gas |
Packaging Type | Box |
Size | 1/2" |
Material | Uniklinger |
Brand | UKL |
The Thermodynamic Trap works on the principle of difference in the velocities of Steam and Condensate. Used Mainly on Drip lines of the main steam distribution line, uses condensate pressure to open the trap and discharge the condensate and then the Flash steam formed due to the high flash steam velocity & accumulation of flash steam over disc, Device close and trap the live steam when it appears.
Thermodynamic Steam Trap are compact and lightweight and discharge condensate as and when it is formed.
Operating Animation:
- Available in Sizes: 15, 20 and 25mm
- End connections: Threaded to BSP/BSPT/NPT, SW and BW, as well as Flanged to #150/300/600/900/1500. e
- Pressure Ranges of 30 bar [UTD21], 55 bar TD55 [Single and Three orifices], 100Bar [UTD 62] AND 250 Bar [UTD120]
- MOC: AISI 420./ 743 Gr. CA40[UTD21/55] / ASTM A217 Gr. WC6[UTD62] / ASTMA 182 Gr. F22 cl3. [UTD120]
- Max. Operating temperature: 425 Deg. C[UTD55] 550 Deg. C. [UTD62/120]
- All the Traps, except UTD120, can be supplied with Isotubs and Blow down cocks.
WCB Globe Valve
Minimum Order Quantity: 10 Piece
End Connection | Flanged |
Leakage Class | 600 |
Country of Origin | Made in India |
Body Material | WCB |
Usage/Application | Industrial |
Brand | Sant |
Driving Mode | Manual |
Cast Iron Pulp Valve
Minimum Order Quantity: 10 Piece
Size | 200mm |
Usage/Application | Industrial |
Standard | ASTM |
Pressure | High Pressure |
Material | Cast Iron |
Model Name/Number | Pulp-200 |
Country of Origin | Made in India |
Brass Y Strainer
Minimum Order Quantity: 10 Piece
Media | Gas |
Shape | Y |
Country of Origin | Made in India |
Size | 2 Inch |
Material | Brass |
Number Of Way | 2 Way |
Connection Type | Thread |
Features:
- Designed to remove solid particles from the steam supply
- Reduce levels of contamination
- Maintain quality of end product
Forbes Marshall Spirax Piston Valve
Minimum Order Quantity: 10 Piece
Maximum Operating Pressure | 78 Bar |
Material | Alloy Steel |
Brand | Spirax |
End Connection | Flanged |
Maximum Operating Temperature | 425 Degree C |
Maximum Hydraulic Test Pressure | 83 Bar |
Description:
- Piston valves provide perfect tightness and durable stability on different mediums such as steam, superheated steam, heat transfer fluid, ammonia, L.P.G, acids, alkalies etc.
Size and Pipe Connections:
- 1. 15 NB / 20 NB / 25 NB /32NB/ 40 NB 2. 50NB/ 65NB/ 80NB/ 100NB/ 125NB/ 150NB/ 200NB.
Limiting Conditions as per IBR norms:
- Flanged ends Screwed BSPT/NPT ends. Socket weld ends.
- Flange Type: ANSI 300, ANSI 150
- Maximum allowable pressure: 51 bar g @ 38 C
- Maximum operating pressure : 41.5 bar g @ 253 C Maximum operating temperature : 425 C @ 28.8 bar g
- Maximum hydraulic test pressure: 83 bar g
- Maximum allowable pressure : 19.6 bar g @ 38 C
- Maximum operating pressure: 14 bar g @ 197 C Maximum operating temperature: 425 C @ 5.5 bar g Maximum hydraulic test pressure : 28 bar
- Maximum Operating Temperature: 425 C
- Maximum Hydraulic Test Pressure:
- Maximum Operating Pressure: 41.5bar
- Maximum Operating Temperature: 425 C
- For (15,20,25 & 40NB) socket weld ends. For 15,20,& 25NB screwed ends. For (32-40 NB) screwed ends. For 50NB/ 65NB/ 80NB/ 100NB/ 125NB/ 150NB/ 200NB
Pressure Reducing Valve
Minimum Order Quantity: 10 Piece
Pressure | 24.4 Bar |
Material | Forged Steel |
Brand | Spirax |
Automation Grade | Semi-Automatic |
Packaging Type | Jute Bag |
Usage/Application | Industrial |
Valve Size | up to 0.25 inch |
Limiting Conditions Maximum Working Condition 26 kg / cm2 at 300° C. Body design Conditions 42 kg / cm2 at 427° C. Cold Hydraulic test pressure without internals 52 kg/cm2 Three colour coded pressure adjustment springs are available for the following downstream pressure ranges: Yellow :02 to 3 bar Blue :2.5 to 7 bar Red :6.0 to 17.3 bar Grey :16.0 to 24.4 bar
Sizes: NB 15,20, 25,40, 50 and 80. Std. Accessories: Pr. Gauge, syphon & Gauge cock Pipe Connections: Flanged to - BS10 table - 'J' * & 'K' ANSI - 300' * & '600' DIN - ND - '25' & * '40' *Note - 80 NB has these flanges only. Available with IBR certificate Also available for air applications.
Additional Information:
- Delivery Time: Ready Stock